The RØDE VideoMic Pro+ is a new addition to the best-in-market on-camera category. It is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | Electret Condenser |
| Diaphragm | 0.55" / 13.97 mm |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| High-Pass Filter | 75 Hz 150 Hz |
| Tone Adjustment | High Boost: +5 dB at 7 kHz |
| Gain Adjustment | -10 dB to +20 dB |
| Indicators | 1 x Single LED (Power, Status) 6 x Single LED (Status) |
| On-Board Controls | Gain/Sensitivity, High-Pass Filter, HF, On/Off |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 133 dB SPL |
| Off-Axis Rejection | 5 dB at 60° 23 dB at 120° >10 dB at 180° |
| Impedance | 200 Ohms |
| Sensitivity | -33.6 dBV/Pa at 1 kHz |
| Output Level | 7.6 dBu (Max) |
| Dynamic Range | 118.8 dB |
| Signal-to-Noise Ratio | 79.8 dB |
| Equivalent Noise Level | 14 dB A-Weighted |
| Output Connectors (Analog) | 1 x 1/8" / 3.5 mm TRS |
| Operating Current Consumption | 12 mA (Battery Power) |
| Battery Type | 1 x Rode LB-1 2 x AA |
| Approximate Battery Life | 100 Hours |
| Mounting | 3/8"-16 Female, Camera/Shoe-Mount, Shockmount (via Integrated Hardware) |
| Dimensions | ø: 4.37 x L: 6.69" / ø: 111 x L: 169.93 mm |
| Weight | 4.3 oz / 122 g |
Building on the already great VideoMic Pro, the Rode VideoMic Pro+ goes even further with handy features and a robust construction needed for your everyday shooting.
Get the great sounding audio even on the go VideoMic Pro+. No need to sacrifice quality for convenience here. The mic is light and packable yet still delivers in nearly all conditions
